Dell S6000 Dell Networking Installation Guide - Page 7

1 About this Guide This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting, and connecting to a power source. After you have completed the hardware installation and power-up of the S6000, for software configuration information, refer to the FTOS Configuration Guide for the S6000 System and for Command line interface (CLI) information, refer to the FTOS Command Line Reference Guide for the S6000 System. NOTE: For information about upgrading the S6000 system, refer to the FTOS Release Notes for the S6000 System. If you have any questions regarding FTOS versions and system upgrades, contact Dell Technical Support. CAUTION: To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this equipment. WARNING: Only trained and qualified personnel can install this equipment. Read this guide before you install and power up this equipment. This equipment contains two power cords. Disconnect both power cords before servicing. WARNING: This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation. WARNING: When no cable is connected, visible and invisible laser radiation may be emitted from the aperture of the optical transceiver ports. Avoid exposure to laser radiation and do not stare into open apertures. Related Publications For more information about the S6000 system, refer to the following documents: • FTOS Configuration Guide for the S6000 System • FTOS Command Line Reference Guide for the S6000 System • FTOS Release Notes for the S6000 System NOTE: For the most recent documentation and software, visit iSupport (registration for access to some sections is required): http://www.dell.com/support/manuals. About this Guide | 7