Dell U2417HWI User Guide - Page 23
Attaching the Cable Cover, Removing the Monitor Stand
![]() |
View all Dell U2417HWI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Attaching the Cable Cover NOTE: The cable cover is detached when the monitor is shipped from the factory. 1 Fit the two tabs on the bottom part of the cable cover to the groove on the back of the monitor. 2 Press the cable cover till it snaps into place. Removing the Monitor Stand NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a soft, clean surface. NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the set-up instructions To remove the stand: 1 Place the monitor on a soft cloth or cushion. 2 Press and hold the stand release button. Setting Up the Monitor | 23
![](/manual_guide/products/dell-u2417hwi-user-guide-ec44b89/23.png)
Setting Up the Monitor
|
23
Attaching the Cable Cover
NOTE:
The cable cover is detached when the monitor is shipped from the factory.
1
Fit the two tabs on the bottom part of the cable cover to the groove on the back of
the monitor.
2
Press the cable cover till it snaps into place.
Removing the Monitor Stand
NOTE:
To prevent scratches on the LCD screen while removing the stand, ensure
that the monitor is placed on a soft, clean surface.
NOTE:
This is applicable for a monitor with a stand. When any other stand is
bought, please refer to the respective stand setup guide for the set-up instructions
To remove the stand:
1
Place the monitor on a soft cloth or cushion.
2
Press and hold the stand release button.