Dell U2422HE Users Guide - Page 83
Troubleshooting, Self-test
View all Dell U2422HE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety instructions. Sel f-test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer. 3. Turn on the monitor. The floating dialog box should appear on-screen (against a black background), if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains white. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through the screen. NOTE: The message may be slightly different according to the connected input signal. 4. This box also appears during normal system operation, if the video cable becomes disconnected or damaged. 5. Turn Off your monitor and reconnect the video cable; then turn On both your computer and the monitor. If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning properly. Troubleshooting │ 83