Dell U4320Q Users Guide - Page 50
Troubleshooting, Self-Test
View all Dell U4320Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-Test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1 Turn off both your computer and the monitor. 2 Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove all digital and the analog cables from the back of computer. 3 Turn on the monitor. The floating dialog box should appear on-screen (against a black background), if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains white. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through the screen. Dell UltraSharp 43 Monitor No HDMI Cable The display will go into Power Save Mode in 4 minutes. www.dell.com/support/U4320Q or Dell UltraSharp 43 Monitor U4320Q No DP Cable The display will go into Power Save Mode in 4 minutes. www.dell.com/support/U4320Q or U4320Q 50 | Troubleshooting