Dell Vostro 130 Service Manual - Page 52

Installing The Card-Reader Board

Page 52 highlights

Installing The Card-Reader Board NOTE: To remove or locate the card-reader board, see Removing The Card-Reader Board. 1. Place the card-reader board in the card-reader board bay. 2. Connect card-reader cable to the system board. 3. Replace and tighten the screws that secure the card-reader board to the computer. 4. Install the audio and hard drive assembly. 5. Install the battery. 6. Install the base cover. 7. Install the Secure Digital (SD) card. 8. Follow the procedures in After working inside your computer. 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71

Installing The Card-Reader Board
NOTE:
To remove or locate the card-reader board, see
Removing The Card-Reader Board
.
1.
Place the card-reader board in the card-reader board bay.
2.
Connect card-reader cable to the system board.
3.
Replace and tighten the screws that secure the card-reader board to the computer.
4.
Install the
audio and hard drive assembly
.
5.
Install the
battery
.
6.
Install the
base cover
.
7.
Install the
Secure Digital (SD) card
.
8.
Follow the procedures in
After working inside your computer
.
52