Dell Vostro 130 Service Manual - Page 54
Installing The Display Closure Sensor, battery, base cover, Secure Digital SD card
View all Dell Vostro 130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Installing The Display Closure Sensor NOTE: To remove or locate the display closure sensor, see Removing the Display Closure Sensor. 1. Connect the flex cable connecting the display closure sensor board to the system board. 2. Replace and tighten the screws that secures the display closure sensor to the computer. 3. Install the battery. 4. Install the base cover. 5. Install the Secure Digital (SD) card. 6. Follow the procedures in After Working Inside Your Computer. 54
Installing The Display Closure Sensor
NOTE:
To remove or locate the display closure sensor, see
Removing the Display Closure Sensor
.
1.
Connect the flex cable connecting the display closure sensor board to the system board.
2.
Replace and tighten the screws that secures the display closure sensor to the computer.
3.
Install the
battery
.
4.
Install the
base cover
.
5.
Install the
Secure Digital (SD) card
.
6.
Follow the procedures in
After Working Inside Your Computer
.
54