Dell Vostro 130 Service Manual - Page 8

Installing The Battery, Removing The Battery, base cover, Secure Digital SD Card

Page 8 highlights

Installing The Battery NOTE: To remove or locate the battery, see Removing The Battery. 1. Place the battery into the battery bay. 2. Replace and tighten the screws that secure the battery to the computer. 3. Connect the battery cable to the system board and press down the cable-release clip to lock the battery cable. 4. Install the base cover. 5. Install the Secure Digital (SD) Card. 6. Follow the procedures in After working inside your computer. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71

Installing The Battery
NOTE:
To remove or locate the battery, see
Removing The Battery
.
1.
Place the battery into the battery bay.
2.
Replace and tighten the screws that secure the battery to the computer.
3.
Connect the battery cable to the system board and press down the cable-release clip to lock the battery cable.
4.
Install the
base cover
.
5.
Install the
Secure Digital (SD) Card
.
6.
Follow the procedures in
After working inside your computer
.
8