Dell Vostro 1710 Service Manual - Page 32
Removing a Memory Module, Replacing a Memory Module - specification
View all Dell Vostro 1710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Back to Contents Page Memory Dell™ Vostro™ 1710 Service Manual Removing a Memory Module Replacing a Memory Module Your computer has two user-accessible SODIMM sockets, both accessed from the bottom of the computer. You can increase your computer memory by installing memory modules on the system board. See "Specifications" in your Setup and Quick Reference Guide for information on the memory supported by your computer. Install only memory modules that are intended for your computer. NOTE: Memory modules purchased from Dell are covered under your computer warranty. Removing a Memory Module CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. 1. Follow the procedures in Before Working on Your Computer. 2. Turn the computer upside down. 3. Loosen the eight screws that secure the memory cover. 4. Remove the memory cover and set it aside. 1 memory cover 2 screws (8) NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips. 5. Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the memory module pops up. 6. Remove the memory module from the connector. 1 securing clips (2) 2 memory module Replacing a Memory Module CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.