Dell Vostro 5401 Service Manual - Page 100
Storage, Display, Table 4. Integrated device options continued, Table 5. Storage options - specification
View all Dell Vostro 5401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Table 4. Integrated device options (continued) Option Description ● Enable USB Boot Support ● Enable External USB Port By default, all the options are enabled. Storage Table 5. Storage options Option SATA Operation Storage Interface SMART Reporting Drive Information Description Allows you to configure the operating mode of the integrated SATA hard drive controller. The options are: ● Disabled ● AHCI ● RAID On-By default, the RAID On option is enabled. NOTE: SATA is configured to support RAID mode. Allows you to enable or disable various drives on board. The options are: ● M.2 PCIe SSD-1 ● M.2 PCIe SSD-0 By default, all the options are enabled. This field controls whether hard drive errors for integrated drives are reported during system startup. This technology is part of the Self Monitoring Analysis and Reporting Technology (SMART) specification. By default, the Enable SMART Reporting option is disabled . Provides information about drive type and device. Display Table 6. Display options Option Display Brightness Full Screen Logo Description Allows you to set the screen brightness when running on battery and AC power. The options are: ● Brightness on battery power - By default, set to 50. ● Brightness on AC power - By default, set to 100. Displays full screen logo when the image matches screen resolution. By default, all the option is disabled. 100 System setup