Dell Vostro 5401 Service Manual - Page 58
Removing the I/O board - discrete
View all Dell Vostro 5401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Removing the I/O board - discrete Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the system fan. 5. Remove the coin-cell battery. About this task The figure indicates the location of the I/O board and provides a visual representation of the removal procedure. Steps 1. Locate the I/O board on your computer. 2. Lift the mylar cover. 3. Peel the adhesive tape to unroute the I/O cable. 4. Open the latch, and disconnect the I/O-board cable from the I/O board. 5. Remove the two screws (M2.5x4) and (M2x3) that secure the left hinge to the computer. 6. Lift the left hinge. 7. Open the latch, and disconnect the fingerprint reader cable from the I/O board. 58 Disassembly and reassembly