Dell Vostro 5401 Service Manual - Page 75
Removing the display assembly - discrete
View all Dell Vostro 5401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Steps 1. Place the display assembly on a clean and flat surface. 2. Align and place the palm-rest and keyboard assembly on the display assembly. 3. Using the alignment posts, close the display hinges. 4. Replace the two screws (M2.5x4) and (M2x3) that secure the left-display hinge to the system board. 5. Replace the two screws (M2.5x4) that secure the right-display hinge to the system board. 6. Connect the display cable on to the connector on the system board and adhere the tape to the system board. Next steps 1. Install the WLAN card. 2. Install the battery. 3. Install the base cover. 4. Follow the procedure in after working inside your computer. Removing the display assembly - discrete Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the WLAN card. About this task The figure indicates the location of the display assembly and provides a visual representation of the removal procedure. Disassembly and reassembly 75