Dell Vostro 5401 Service Manual - Page 34
Removing the M.2 2280 solid-state drive - SSD-1 - discrete, Installing the M.2 2280 solid-state
![]() |
View all Dell Vostro 5401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Steps 1. Align the solid-state drive bracket to accommodate the M.2 2230 solid-state drive. 2. Replace the single (M2x3) screw to secure the solid-state drive module to the palm-rest and keyboard assembly. Next steps 1. Connect the battery. 2. Install the base cover. 3. Follow the procedure in after working inside your computer. Removing the M.2 2280 solid-state drive - SSD-1 - discrete Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Disconnect the battery. About this task NOTE: Slot one supports both M.2 2230 and M.2 2280 SSD. The figure indicates the location of the M.2 2280 solid-state drive in slot one and provides a visual representation of the removal procedure. Steps 1. Remove the single screw (M2x3) that secures the solid-state drive to the palm-rest and keyboard assembly. 2. Slide and remove the solid-state drive module from the solid-state drive slot on the system board. Installing the M.2 2280 solid-state drive - SSD-1 - discrete Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. 34 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-5401-service-manual-cb6a21c/34.png)