Dell Vostro 5401 Service Manual - Page 54
Removing the coin-cell battery - discrete, Installing the coin-cell battery - discrete
View all Dell Vostro 5401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Steps 1. Adhere the coin-cell battery to the slot on the palm-rest and keyboard assembly. 2. Route the coin-cell battery cable as illustrated and connect it to the I/O board. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in after working inside your computer. Removing the coin-cell battery - discrete Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery. NOTE: Removing the coin-cell battery resets the BIOS setup program settings to default. It is recommended that you note the BIOS setup program settings before removing the coin-cell battery. About this task The figure indicates the location of the coin-cell battery and provides a visual representation of the removal procedure. Steps 1. Disconnect the coin-cell battery cable from the I/O board. 2. Peel the coin-cell battery off the palm-rest and keyboard assembly. Installing the coin-cell battery - discrete Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. 54 Disassembly and reassembly