Dell Vostro 5401 Service Manual - Page 65
Removing the DC-in port - discrete
View all Dell Vostro 5401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Steps 1. Place the DC-in port on the palm-rest and keyboard assembly. 2. Replace the single screw (M2x3) on the DC-in port using bracket. 3. Connect the DC-in cable to the system board. 4. Adhere the transparent sticker. 5. Lower the metal hinge. 6. Replace the two (M2.5x4) screws, and tighten it. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in after working inside your computer. Removing the DC-in port - discrete Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery. Disassembly and reassembly 65
Steps
1.
Place the DC-in port on the palm-rest and keyboard assembly.
2.
Replace the single screw (M2x3) on the DC-in port using bracket.
3.
Connect the DC-in cable to the system board.
4.
Adhere the transparent sticker.
5.
Lower the metal hinge.
6.
Replace the two (M2.5x4) screws, and tighten it.
Next steps
1.
Install the
battery
.
2.
Install the
base cover
.
3.
Follow the procedure in
after working inside your computer
.
Removing the DC-in port - discrete
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
battery
.
Disassembly and reassembly
65