Dell Vostro 5401 Service Manual - Page 72
Display assembly, Removing the display assembly - UMA
![]() |
View all Dell Vostro 5401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
4. Align and place the touchpad bracket into the slot on the palm-rest and keyboard assembly. 5. Replace the three (M1.6x2) screws that secure the touchpad bracket to the palm-rest and keyboard assembly. 6. Lower the latch on the touchpad cable once it is connected to the connector on the system board. Next steps 1. Install the speakers. 2. Install the battery. 3. Install the base cover. 4. Follow the procedure in after working inside your computer. Display assembly Removing the display assembly - UMA Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the WLAN card. About this task The figure indicates the location of the display assembly and provides a visual representation of the removal procedure. 72 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-5401-service-manual-cb6a21c/72.png)