Dell W-7030 Controller Installation Guide - Page 10

 STATUS: Placed on the right side of the port, this LED displays the status of the port. The information displayed by this LED changes based on the LCD mode. The LED behavior for each mode is describe in Table 5 and Table 6. Table 5 10/100/1000Base-T Port LEDs LED Function LCD Mode Indicator Status LINK/ACT STATUS Link status N/A Port status Administrative Duplex Speed Green (Solid) Green (Blinking) Off Green (Solid) Off Green (Solid) Off Green (Solid) Off Link has been established Port is transmitting or receiving data No link Port Enabled Port Administratively Disabled Full-duplex Half-duplex 1000 Mbps 10/100 Mbps 1000Base-X Port LEDs Each 1000Base-X port is equipped with two LEDs that allow basic monitoring of status, activity, and configuration of the port.  LINK/ACT: Placed above/below the port, this LED displays the link status and activity of the port.  STATUS: Placed above/below the port, this LED displays the status of the port. The information displayed by this LED changes based on the LCD mode. The LED behavior for each mode is described in Table 6 Table 6 1000Base-X Port LEDs LED Function LCD Mode Indicator Status LINK/ACT STATUS Link status N/A Port status Administrative Duplex Speed Green (Solid) Green (Blinking) Off Green (Solid) Off Green (Solid) Off Green (Solid) Off Link has been established Port is transmitting or receiving data No link Port Enabled Port Administratively Disabled Full-duplex N/A 1 Gbps N/A 18 | W-7030 Controller Dell Networking W-7030 Controller | Installation Guide