Dell W-7030 Controller Installation Guide - Page 17
Rack Mount Brackets, Rack Mount Installation
View all Dell W-7030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Figure 1 Rack Mount Brackets 3. If the rack requires cage nut or clip nut, insert it on the front rails (two per rail, aligned horizontally). 4. Mount the controller in the rack using the four screws for system rack mount (two per bracket) and a suitable screwdriver (see Figure 2). Figure 2 Rack Mount Installation NOTE: Leave a minimum of 10 cm (4 inches) of space on the left and right side of the controller for proper air flow and ventilation. Leave additional space in the front and the back of the controller to access network cables, LED status indicators, and power cord. Dell Networking W-7030 Controller | Installation Guide Installation | 9
Dell Networking W-7030 Controller
| Installation Guide
Installation
|
9
Figure 1
Rack Mount Brackets
3.
If the rack requires cage nut or clip nut, insert it on the front rails (two per rail, aligned horizontally).
4.
Mount the controller in the rack using the four screws for system rack mount (two per bracket) and a suitable
screwdriver (see
Figure 2
).
Figure 2
Rack Mount Installation
NOTE:
Leave a minimum of 10 cm (4 inches) of space on the left and right side of the controller for proper air flow and
ventilation. Leave additional space in the front and the back of the controller to access network cables, LED status indicators,
and power cord.