Dell W-7030 Controller Installation Guide - Page 18
Table or Shelf Installation, Required Tools and Equipment, Installation Steps, Wall Mounting
View all Dell W-7030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Table or Shelf Installation Required Tools and Equipment Rubber Feet (included in the package) Installation Steps 1. Attach the rubber feet to the bottom of the controller (see Figure 3). Figure 3 Attaching Rubber Feet 2. Place the controller in the desired location. Wall Mounting The mounting brackets can also be used for wall mounting the W-7030 controller. Required Tools and Equipment The following tools and equipment are required for installing a W-7030 controller on a wall: Mounting Brackets (2x) Screws for mounting bracket (x8): M3 x 6.5 mm Phillips Flat Head Screws Wall Anchors: Optional accessory (not included in the package) Wall Mounting Screws: The type of screw depends on the installation surface (not included in the package) Suitable Screwdrivers for all screw types (not included in the package) Installation Steps To install a W-7030 controller on a wall: NOTE: Ensure that the Ethernet ports are facing down when installing the W-7030 controller on a wall. 1. Fasten the mounting brackets over the mounting holes on the sides of the W-7030 controller using the eight screws for mounting bracket (four per bracket) and a suitable screwdriver (see Figure 4). 10 | Installation Dell Networking W-7030 Controller | Installation Guide