Dell W-7030 Controller Installation Guide - Page 14

Serial Console Port Adaptor, Power Supply, Grounding Point, Kensington Lock, SFP Modules

Page 14 highlights

Serial Console Port Adaptor A modular adaptor can be used to convert the female RJ-45 connector to a male DB9 connector. See Figure 13 for complete details. Figure 13 RJ-45 (Female) to DB9 (Male) Modular Adapter Conversion RJ-45 Female Pin-Out Internal Connections DB-9 Male Pin-Out 1 2 3 TxD 4 5 GND 6 RxD 7 8 RJ-45 3 TxD 4 5 GND 6 RxD DB-9 2 5 3 9 8 7 6 5 Ground 4 3 RxD 2 TxD 1 Power Supply The W-7030 controller is equipped with an integrated AC power supply of 80W. Grounding Point To meet safety and electromagnetic interference (EMI) requirements and to ensure proper operation, the controller must be adequately grounded before power is connected. Connect a grounding cable to earth ground and then attach it to the chassis grounding point using two screws. Comply with electrical grounding standards during all phases of installation and operation of the product. Do not allow the controller's chassis, network ports, power supply, or mounting brackets to contact any device, cable, object, or person attached to a different electrical ground. Also, never connect the device to external storm grounding sources. Kensington Lock The W-7030 controller is equipped with a Kensington security slot for additional security. SFP Modules SFP Modules, also known as mini-GBICs, are hot-swappable Gigabit Ethernet transceivers that provide optical or copper connections to other devices. NOTE: Dell tests and supports Dell approved optics within Dell controller devices. Non-approved third party optics are not tested or supported; therefore, Dell does not guarantee proper functionality of non-approved third party optics when used in a Dell system. For a complete list of Dell approved optics, contact a Dell sales representative. Table 10 Supported SFPs SFP Description SFP-SX SFP-LX Dell SFP, 1000BASE-SX, LC Connector; 850nm pluggable GbE optic; up to 300 meters over multi-mode fiber (Type OM2) Dell SFP, 1000BASE-LX, LC Connector; 310nm pluggable GbE optic; up to 10,000 meters over single-mode fiber 22 | W-7030 Controller Dell Networking W-7030 Controller | Installation Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

22
|
W-7030 Controller
Dell Networking W-7030 Controller
| Installation Guide
Serial Console Port Adaptor
A modular adaptor can be used to convert the female RJ-45 connector to a male DB9 connector. See
Figure 13
for
complete details.
Figure 13
RJ-45 (Female) to DB9 (Male) Modular Adapter Conversion
Power Supply
The W-7030 controller is equipped with an integrated AC power supply of 80W.
Grounding Point
To meet safety and electromagnetic interference (EMI) requirements and to ensure proper operation, the
controller must be adequately grounded before power is connected. Connect a grounding cable to earth ground
and then attach it to the chassis grounding point using two screws.
Comply with electrical grounding standards during all phases of installation and operation of the product. Do not
allow the controller’s chassis, network ports, power supply, or mounting brackets to contact any device, cable,
object, or person attached to a different electrical ground. Also, never connect the device to external storm
grounding sources.
Kensington Lock
The W-7030 controller is equipped with a Kensington security slot for additional security.
SFP Modules
SFP Modules, also known as mini-GBICs, are hot-swappable Gigabit Ethernet transceivers that provide optical or
copper connections to other devices.
3
4
5
2
5
6
3
RJ-45
DB-9
Internal
Connections
TxD
GND
RxD
1
2
3
4
5
6
7
8
TxD
GND
RxD
RJ-45 Female
Pin-Out
DB-9 Male
Pin-Out
TxD
RxD
Ground
5
4
3
2
1
9
8
7
6
NOTE:
Dell tests and supports Dell approved optics within Dell controller devices. Non-approved third party optics are not tested
or supported; therefore, Dell does not guarantee proper functionality of non-approved third party optics when used in a Dell
system. For a complete list of Dell approved optics, contact a Dell sales representative.
Table 10
Supported SFPs
SFP
Description
SFP-SX
Dell SFP, 1000BASE-SX, LC Connector; 850nm pluggable GbE optic; up to 300 meters over multi-mode fiber (Type
OM2)
SFP-LX
Dell SFP, 1000BASE-LX, LC Connector; 310nm pluggable GbE optic; up to 10,000 meters over single-mode fiber