Dell W-7200 PowerConnect Series Controller Installation Guide - Page 11

Table 6 10GBase-X Port LEDs LED Function Status Port status LCD Mode Administrative Duplex Speed Indicator Green (Solid) Off Green (Solid) Off Green (Solid) Off Status Port Enabled Port Administratively Disabled Full-duplex Half-duplex 10 Gbps Speed mismatch Management/Status LED Indicators In addition to the LEDs on each individual port, there are three additional LEDs on the front panel that provide overall status of the device. These LEDs provide basic monitoring of the overall status of the W-7200 controller. Table 7 Management/Status LEDs LED Function Indicator Status Power Status Peered Input power status/ system Green (Solid) status Off Module status Green (Solid) Green (Blinking) Reserved for future use Amber (Blinking) Amber (Solid) Off N/A Power On Power Off Operational Device is loading software (on initial start only) Major Alarm Critical Alarm No power N/A LCD Panel The W-7200 controller is equipped with an LCD panel that displays a variety of information about the controller's status and provides a menu that allows for basic operations such as initial setup and reboot. The LCD panel displays two lines of text with a maximum of 16 characters on each line. When using the LCD panel, the active line is indicated by an arrow next to the first letter. Dell PowerConnect W-7200 Series Controller | Installation Guide Dell PowerConnect W-7200 Controller | 11