Dell W-7200 PowerConnect Series Controller Installation Guide - Page 15

Serial Console Port Adaptor A modular adaptor can be used to convert the RJ-45 (female) connector to a DB9 (male) connector. Refer to Figure 5 for complete details. Figure 5 RJ-45 (female) to DB9 (male) Modular Adaptor Conversion RJ-45 Female Pin-Out 1 2 3 TxD 4 5 GND 6 RxD 7 8 Internal Connections RJ-45 3 TxD 4 5 GND 6 RxD DB-9 2 5 3 DB-9 Male Pin-Out 9 8 7 6 5 Ground 4 3 RxD 2 TxD 1 USB Interface The W-7200 controller is equipped with one USB 2.0 interface. A USB storage device can be used to save and upload configurations to the controller. USB functions are controlled through the LCD panel on the front of the controller. For more information on the LCD panel and its functions, see "LCD Panel" on page 11. Expansion Slot The expansion slot is reserved for future use. Rear Panel The rear panel of the W-7200 controller consists of the following components:  Two power supply slots  One fan tray slot  Grounding point Figure 6 Rear Panel 7200_02 Dell PowerConnect W-7200 Series Controller | Installation Guide Dell PowerConnect W-7200 Controller | 15