Dell W-7200 PowerConnect Series Controller Installation Guide - Page 18
Modules, LEDs, Callout, Component, Description, Indicator, Status
View all Dell W-7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Modules The 350W power supply is an autosensing, load-sharing, redundant power supply module that supports an input voltage of 100 VAC to 240 VAC. Each power supply has a country-specific power cord for connection to an AC power outlet. Figure 9 Power Supply (AC Power Supply Shown) 12 3 4 7200_06 7 8 5 6 Table 15 Power Supply Components Callout Component 1 Latch 2 AC LED 3 DC LED 4 TEMP LED 5 Retaining Clip 6 AC Power Cable Socket 7 Handle 8 Power Supply Blanking Plate Description Used to secure the power supply to the chassis. AC status LED. DC status LED. Power supply temperature LED. Secures the power cord to the power supply. Attach power cord here. Used to insert and remove the power supply from the chassis. Covers the extra power supply slot. Do not operate your W-7200 controller without this blanking plate or a power supply in either slot. LEDs Each power supply is equipped with three LEDs to help monitor the power supply module's status. Table 16 Power Supply Module LEDs LED Description Indicator Status AC AC Status Green (Solid) Operating Normally AC voltage is OK. Red (Solid) Power Supply Failure 18 | Dell PowerConnect W-7200 Controller Dell PowerConnect W-7200 Series Controller | Installation Guide