Dell W-Series 314 Instant 6.4.3.1-4.2 User Guide - Page 167
TACACS, CPPM Server, CoA only, TACACS Configuration Parameters
View all Dell W-Series 314 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Parameter Description Filter Specify the filter to apply when searching for a user in the LDAP database. The default filter string is (objectclass=*). Key Attribute Specify the attribute to use as a key while searching for the LDAP server. For Active Directory, the value is sAMAccountName Timeout Enter a value between 1 and 30 seconds. The default value is 5. Retry count Enter a value between 1 and 5. The default value is 3. Dead Time Specify a dead time for authentication server in minutes within the range of 1-1440 minutes. The default dead time interval is 5 minutes. When two or more authentication servers are configured on the W-IAP and a server is unavailable, the dead time configuration determines the duration for which the authentication server would be available if the server is marked as unavailable. l TACACS-To configure TACACS server, select the TACACS option and configure the following parameters: Table 33: TACACS Configuration Parameters Parameter Description Name Enter a name for the server. IP address Enter the IP address of the TACACS server. Auth Port Enter aTCP IP port used by the server. The default port number is 49. Shared Key Enter a secret key of your choice to authenticate communication between the TACACS+ client and server. Retype Key Re-enter shared key. Timeout Enter a number between 1 and 30 seconds to indicate the timeout period for TACACS+ requests. The default value is 20 seconds. Retry Count Enter a number between 1 and 5 to indicate the maximum number of authentication attempts. The default value is 3. Dead time Specify a dead time in minutes within the range of 1-1440 minutes. The default dead time interval is 5 minutes. Session Enables or disables session authorization. When enabled, the optional authorization session is authorization turned on for the admin users. By default, session authorization is disabled. You can also add TACACS server by selecting the New option when configuring authentication parameters for management users. For more information, see Configuring Authentication Parameters for Management Users on page 154. l CPPM Server for AirGroup CoA-To configure a CPPM server used for AirGroup CoA (Change of Authorization), select the CoA only checkbox. The RADIUS server is automatically selected. 167 | Authentication and User Management Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide