Dell W-Series 314 Instant 6.4.3.1-4.2 User Guide - Page 284
Configuring AirGroup and CPPM interface in Instant, Creating a RADIUS Server
View all Dell W-Series 314 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 284 highlights
To verify the AirGroup configuration status: (Instant AP)# show airgroup status Configuring AirGroup and CPPM interface in Instant Configure the Instant and CPPM interface to allow an AirGroup W-IAP and CPPM to exchange information regarding device sharing, and location. The configuration options define the RADIUS server that is used by the AirGroup RADIUS client. The AirGroup configuration with CPPM involves the following steps: 1. Create a RADIUS service 2. Assign a Server to AirGroup 3. Configure CPPM to Enforce Registration Creating a RADIUS Server You can configure an external RADIUS Security window. For more information on the configuring CPPM server, see Configuring an External Server for Authentication on page 164. You can also create a RADIUS server in the Air Group window. Navigate to Services > AirGroup > Clear Pass Settings > CPPM server 1 > and select New from the drop-down list. Assign a Server to AirGroup To associate the CPPM server with AirGroup, select the CPPM server from the CPPM Server 1 drop-down list. If two CPPM servers are configured, the CPPM server 1 acts as a primary server and the CPPM server 2 acts as a backup server. After the configuration is complete, this particular server will be displayed in the CoA server option. To view this server go to Services> AirGroup >ClearPass Settings > CoA server. Configure CPPM to Enforce Registration When CPPM registration is enforced, the devices registered with CPPM will be discovered by Bonjour devices, based on the CPPM policy. Change of Authorization (CoA) When a RADIUS server is configured with Change of Authorization (CoA) with the CPPM server, the guest users are allowed to register their devices. For more information on configuring RADIUS server with CoA , see Configuring an External Server for Authentication on page 164. You can also create a CoA only server in the Services > AirGroup > Clear Pass Settings > CoA server window. Configuring a W-IAP for RTLS Support Instant supports the real-time tracking of devices when integrated with the W-AirWave Management Platform, or a third-party Real Time Location Server such as Aeroscout Real Time Location Server. With the help of the RTLS, the devices can be monitored in real-time or through history. You can configure RTLS using the Instant UI or CLI. In the Instant UI To configure Aruba RTLS: Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Services | 284