Dell Wyse 3010 Wyse ThinOS Version 8.5 and ThinOS Lite 2.5 Operating System Re - Page 42
BIOS configuration on Wyse 5070 thin client, configuration
View all Dell Wyse 3010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
BIOS configuration on Wyse 5070 thin client Table 11 describes the INI parameters to configure Dell BIOS settings on Wyse 5070 thin client. Table 36. INI parameters INI parameters Device=DellCmos [CurrentPassword=password] [CurrentPasswordEnc=password encrypted] [NewPassword=password] [NewPasswordEnc=password encrypted] [Audio={yes, no}] [AdminLock={yes, no}] [AutoPower={Disable, Daily, Workday, Days}] [AutoPowerTime=hh:mm] [AutoPowerDays={Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday}] [ACRecovery={PowerOff, PowerOn, LastState}] [USBRearPort={yes, no}] [USBFrontPort={yes, no}] [WakeOnLan={Disable, LAN, PXE}] [WakeOnUSB={yes,no}] [USBBootSupport={yes, no}] [PXEBootSupport={yes, no}] Description These INI parameters are applicable to thin clients with Dell standard BIOS. Supported platforms: • Wyse 3040 thin client • Wyse 5070 thin client [CurrentPassword=password]-This option provides the current BIOS password for changing BIOS settings when device's admin password is available. [CurrentPasswordEnc=password encrypted]-This option is used to provide encrypted current password. [NewPassword=password]-This option is used to change device's password. Current Password is not required if device's admin password is not available. [NewPasswordEnc=password encrypted]-This option is used to provide encrypted new password. NOTE: Password encrypted is of higher priority. For example: If both CurrentPassword and CurrentPasswordEnc are configured, then CurrentPasswordEnc overwrites the CurrentPassword. [Audio={yes, no}]-This option enables or disables the integrated audio controller. BIOS default value is yes. All Dell BIOS settings take effect after the power off restart. [AdminLock={yes, no}]-When enabled, this option prevents user from entering setup when an admin password is set. Default value is no. [AutoPower={Disable, Daily, Workday, Days}]-This option sets the time of day when you want the system to automatically turn on. No/Disable-The system does not automatically power up; Yes/ Daily-The system power ups every day at the time specified in AutoPowerTime; Workday-The system power ups Monday through Friday at the time specified in AutoPowerTime; Days-The system power ups on the days specified in AutoPowerDays. [AutoPowerTime=hh:mm]-This option specifies the auto power on time, value range of hh is 0-23, while mm is 0-59. [AutoPowerDays={Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday}]-This option specifies the days to power up system automatically. For example, Device=DellCmos AutoPower=Days AutoPowerTime=2:30 AutoPowerDays=Sunday; Friday; Saturday 42 ThinOS 8.5_107