Dell Wyse 3010 Wyse ThinOS Version 8.5 and ThinOS Lite 2.5 Operating System Re - Page 48

INI parameters SessionConfig=RDP *[GracefulReconnTimeout={10 - 100}] SessionConfig=PCoIP *[DisableRTAV=[yes, no]] PnliteServer=List of {IP address, DNS names or URLs} *[IgnoreDefaultGateway=[yes, no]] IEEE8021X=[yes, no] *[network={wired, wireless}] *[wiredreset=[yes, no]] SessionConfig=ICA *[DisableMMRSeek =[yes, no]] AdminMode=[yes, no] *[ShowAESButton=[yes, no]] Description plan-text) are used to specify the SCEP administrator's credential, and ScepAdminUrl must be set correctly to specify the corresponding SCEP admin web page's URL. If EnrollPwd or EnrollPwdEnc is set, client tries to use these set of settings to automatically get an enrollment password and then use that password to request a certificate. If communication security is necessary in your environment during this phase, add https:// as the prefix for ScepAdminUrl to use HTTPS instead of the default HTTP protocol. Use ScepAutoEnroll=no AutoRenew=yes to only enable SCEP auto renew; all other parameters are not needed if ScepAutoEnroll is set to no. You can set SessionConfig=RDP to establish the default setting for RDP sessions. The option enables you to set a timeout for RDP to reconnect the session. If there is no response from the server during this time period, it avoids the RDP session to stop responding for a long time and cannot auto-reconnect due to poor network connection or short time network disconnection. There is no default value for this option; the feature is disabled if it is not set. The valid value is 10 to 100, in seconds. SessionConfig- Specifies the PCoIP default settings of the optional connection parameters for all PCoIP sessions. The option DisableRTAV can disable the RTAV virtual channel in a session for RTAV virtual channel which may impact the performance of some audio or video related applications. The default value is no. A list of host names or IP addresses with optional TCP port number or URLs of PN-Lite servers. The default value is empty. Each entry with an optional port is specified in the format Name-or-IP:port, where :port is optional. If port number is not specified, port number 80 is used. When you specify a port number, it is saved in the non-volatile memory. The IgnoreDefaultGateway option ignores the default gateway of the current selected store during Netscaler login. You must always use pnliteserver to continue. The value yes is used to ignore. The default value is no that uses default gateway as the Netscaler server to reset login again. If IEEE8021X is set to no, then all other parameters following the parent parameter are ignored. Also, network is not configured, and the configuration is ignored. The option wiredreset is used to reset the MII when authenticate cancel occurs. This option is only for wired network, and it is disabled by default. You can set ICA to establish the default settings for ICA sessions. The DisableMMRSeek option can be used to disable the MMR seek capability on the client side. The default value is no. It might cause trap while enabling this setting with some specific servers, for example, Windows 10 IoT Enterprise. AdminMode-Default is no. Yes/no option to use the username and the password to obtain a high thin client configuration when the privilege parameter level is set to high (Privilege=high). If ShowAESButton=yes is specified, and you enter into the admin mode, the AES Encrypt button is displayed in the System Admin dialog box. Press this button to launch the encrypted generator to generate enc-password for INI settings. You can set ShowAESButton=no to hide this button. If Enc-Username and Enc-Password are available, then the default value is yes, or the default value is no. NOTE: INI parameter with an asterisk is a newly added parameter. 48 ThinOS 8.5_107