Dell Wyse 3010 Wyse ThinOS Version 8.5 and ThinOS Lite 2.5 Operating System Re - Page 46

INI parameters *[SCRemovalBehavior= {none or -1, logoff or 0, lock or 1, killsessions or 2}] Description The user must be a domain user, and the same sign-on user credentials must be available in the ftp://~/wnos/ini/directory. Set SCRemovalBehavior=killsessions can be used along with the AutoSignoff parameter. Device=vusb *[TCXDVCdefault={yes, no}] The default value is no. Set yes for RDP to establish the first connection faster when USB device is redirected. Privilege=None TCPTosDscp=[Default/CS1/CS2/CS3/CS4 /CS5/CS6/CS7/AF11/AF12/AF13/AF22/ AF23/AF31/AF32/AF33/AF42/AF43/EF] TCPTosDscp: Use this option to set the TOS field of all TCP packets when the fields are not pre-configured by other INI settings. UDPTosDscp: Use this option to set the TOS field of all UDP packets when the fields are not pre-configured by other INI settings. UDPTosDscp=[Default/CS1/CS2/CS3/CS4 /CS5/CS6/CS7/AF11/AF12/AF13/AF22/ AF23/AF31/AF32/AF33/AF42/AF43/EF] Added new sheet TOS_Priority_settings for TosDSCP INI, which is merged from TOS_Priority_settings.docx. For more information, see TOS priority settings for TosDSCP INI. SecurityPolicy={full, warning, low} *[TLSCheckCN=[yes, no]] Specifies the global security mode for SSL connection. If application SecurityMode is default, application applies the setting. If set to full, the SSL connection must verify server certificate. If it is untrusted, connection is dropped. If set to warning, the SSL connection musts verify server certificate. If it is untrusted, it is up to you to continue or drop the connection. If set to low, the server certificate is not checked. The value is persistent, and the default value is warning. For those SSL connections with their own security policy, this does not impact. For example, • File server with https protocol has its own security mode (Full, Warning and None), the default is Full. • VMware View and AWS broker have its own security mode (Full, Warning and None), the default is Warning. • Citrix broker, RDS broker, and SECUREMATRIX force to high security mode The option TLSCheckCN enables/disables the ThinOS client to check server certificate common name when connecting to SSL in full security mode. This option does not effect the SSL connections of VMware View, Amazon Workspaces, and VPN. These three connections checks server certificate common names all the time. The default value is changed to yes from build version 8.5_106. NOTE: Use NetBIOS or FQDN values to define an SSL (Https) connection when enabling TLSCheckCN option (TLSCheckCN=yes), enabling TLSCheckCN results in SSL connection failure (SignOn failures) when an IP address is defined. *Device=mouse[Speed=[1-9]] [Swap={yes, no}] [FlipFlopWheel={yes, no}] [Big={yes, no}] The Speed is used to configure mouse's moving speed. 1 is the slowest, 9 is the fastest. The default value is 6. This parameter is the replacement of MouseSpeed. If Swap=yes is set, right button is set as primary button. The default value is no. Set MouseFlipFlopWheel=yes to invert the mouse scroll wheel, the default value is no. If Big=yes is set, the size of local mouse pointer is increased by two times. The default value is no. This is designed for Wyse 5070 thin client only. Dualhead=[yes, no] *[ManualOverride=[yes, no]] *[Taskbar=["wholescreen", "mainscreen"]] Dualhead parameter is applicable for Wyse 5070 thin client. If ManualOverride=yes, all the parameters are only valid in factory default. It allows you to configure display setting manually if both single monitor and a dual monitor exist in an environment. This is not applicable for Wyse 5070 thin client. 46 ThinOS 8.5_107