Dell XPS 15 9560 XPS 15 Service Manual - Page 46
Removing the fans, Prerequisites, Procedure
View all Dell XPS 15 9560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Removing the fans WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery (half-length) or the battery (full-length). Procedure 1 Remove the two screws (M2x4) that secure the video fan (JFAN_2) to the system board. 2 Disconnect the touch-screen cable (optional) from the system board. NOTE: The touch-screen cable is available only on laptop configurations with touch displays. 3 Peel off the tape that secures the touch-screen cable (optional) to the video fan (JFAN_2). 4 Note the routing of the touch-screen cable and remove the cable from the routing guides on the video fan (JFAN_2). 5 Disconnect the video fan (JFAN_2) cable from the system board. 46