Dell XPS 15 9560 XPS 15 Service Manual - Page 50
Removing the heat-sink assembly, Prerequisites, Procedure
![]() |
View all Dell XPS 15 9560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Removing the heat-sink assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. WARNING: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it. CAUTION: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can reduce the heat transfer capability of the thermal grease. Prerequisites 1 Remove the base cover. 2 Remove the battery (half-length) or the battery (full-length). Procedure 1 Remove the five screws (M2x3) that secure the heat-sink assembly to the system board. NOTE: Depending on the configuration ordered, some configurations may have four screws (M2x3). 50
![](/manual_guide/products/dell-xps-15-9560-xps-15-service-manual-4420ea7/50.png)