Dell XPS 15 9560 XPS 15 Service Manual - Page 78

Replacing the display assembly, Procedure, Post-requisites

Get Dell XPS 15 9560 PDF manuals and user guides View all Dell XPS 15 9560 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

Replacing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Place the palm-rest assembly at the edge of the table with the speakers facing away from the edge. 2 Align the screw holes on the palm-rest assembly with the screw holes on the display hinges. 3 Replace the six screws (M2.5x5) that secure the display hinges to the palm-rest assembly. 4 Adhere the tape and route the touch-screen cable (optional) through the routing guides on the fan. 5 Connect the touch-screen cable and display cable to the system board. NOTE: The touch-screen cable is available only on laptop configurations with touch displays. 6 Replace the screw (M2x2) that secures the display-cable bracket to the system board. Post-requisites 1 Replace the wireless card. 2 Replace the battery (half-length) or the battery (full-length). 3 Replace the base cover. 78

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance
.
Procedure
1
Place the palm-rest assembly at the edge of the table with the speakers facing
away from the edge.
2
Align the screw holes on the palm-rest assembly with the screw holes on the
display hinges.
3
Replace the six screws (M2.5x5) that secure the display hinges to the palm-rest
assembly.
4
Adhere the tape and route the touch-screen cable (optional) through the routing
guides on the fan.
5
Connect the touch-screen cable and display cable to the system board.
NOTE: The touch-screen cable is available only on laptop
configurations
with touch displays.
6
Replace the screw (M2x2) that secures the display-cable bracket to the system
board.
Post-requisites
1
Replace the
wireless card
.
2
Replace the
battery (half-length)
or the
battery (full-length)
.
3
Replace the
base cover
.
78