Dell XPS 15 9560 XPS 15 Service Manual - Page 74
Removing the display assembly, Prerequisites, Procedure
![]() |
View all Dell XPS 15 9560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Removing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery (half-length) or the battery (full-length). 3 Remove the wireless card. Procedure NOTE: The touch-screen cable is available only on laptop configurations with touch displays. 1 Remove the screw (M2x2) that secures the display-cable bracket to the system board. 2 Disconnect the touch-screen cable and display cable from the system board. 74
![](/manual_guide/products/dell-xps-15-9560-xps-15-service-manual-4420ea7/74.png)