Dell XPS M1530 M1530 XPS M1530 Service Manual - Page 28
Replacing the Processor Thermal-Cooling Assembly
View all Dell XPS M1530 M1530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
1 2 1 fan cable connector 2 M2.5 x 5-mm screw 4 Disconnect the thermal fan cable connector from the system board. NOTE: The fan is a part of the thermal-cooling assembly. 5 Tilt the thermal-cooling assembly slightly and lift it out of the computer. Replacing the Processor Thermal-Cooling Assembly CAUTION: Before working inside your computer, follow the safety instructions in the Product Information Guide. NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface. NOTE: The original pad can be reused if the original processor and heat sink are reinstalled together. If either the processor or heat sink is replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved. 28 Processor Thermal-Cooling Assembly