Dell XPS M1530 M1530 XPS M1530 Service Manual - Page 43
Replacing the FCM or UWB, Insert
View all Dell XPS M1530 M1530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
4 Ground yourself by touching one of the metal connectors on the back of the computer. NOTE: If you leave the area, ground yourself again when you return to the computer. 5 Remove the M2 x 3-mm securing screw. NOTE: In case of an UWB card, disconnect the blue antenna cable from the UWB card. 6 Remove the FCM or UWB card. 1 2 1 FCM card 2 M2 x 3-mm securing screw Replacing the FCM or UWB NOTICE: Install the FCM or UWB in the WWAN or WPAN slot. Do not install an FCM or UWB in the WLAN card slot. Doing so may cause damage to your computer. 1 Insert the FCM or UWB connector at a 45-degree angle into the system board connector labeled "FCM" or "UWB." 2 Press the other end of the FCM or UWB down into the slot on the system board until the card clicks into place. 3 Replace the M2 x 3-mm securing screw. NOTE: In case of an UWB card, reconnect the blue antenna cable to the UWB card. Communication Cards 43