Dell XPS M1530 M1530 XPS M1530 Service Manual - Page 45
Hinge Covers and Center Control Cover, Removing the Hinge Covers and Center Control Cover
View all Dell XPS M1530 M1530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
7 Hinge Covers and Center Control Cover CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer. Removing the Hinge Covers and Center Control Cover 1 Follow the procedures in "Before You Begin" on page 9. 2 Turn the computer over and remove the three M2 x 2-mm screws that secure the center control cover. 3 Turn the computer top side up, and open the display as far as it will open. 4 Ease the center control cover up until you see the cable connector that attaches the cable to the system board. NOTICE: Be extremely careful when removing the Center Control Cover. The cover along with the cable that attaches to it are very fragile. Hinge Covers and Center Control Cover 45