Dell Z9264F-ON EMC PowerSwitch Installation Guide March 2022 - Page 10
Prerequisites, Z9264F-ON switch configurations, Luggage tag
View all Dell Z9264F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Table 4. QSFP28 port LEDs (continued) LED Link/Activity LED-2x50G mode Description ● Flashing yellow, 1 second on/off-Port beacon ● Off-No link ● Solid yellow-Link operating at a lower speed, 2x50G port ● Flashing yellow-Port activity at a lower speed, 2x50G port ● Flashing yellow, 1 second on/off-Port beacon Prerequisites The following is a list of components that are required and optional for successful switch installation: NOTE: For detailed installation instructions, see Site preparations and Z9264F-ON switch installation. ● Z9264F-ON switch or multiple switches, if stacking ● AC or DC country- and regional-specific cables to connect the AC or DC power source to each of the AC or DC power supplies ● Rail mounting brackets for rack installation, included ● M4 screws for rack installation ● #1 and #2 Phillips screwdrivers, not included ● Torx screwdriver, not included ● Ground cable screws for L-bracket, included ● Copper/fiber cables Other optional components are: ● M4 ground cable screw ● Extra power supply unit ● Extra fan module NOTE: The DC ground lug kit ships with the other accessories inside the shipping box. Z9264F-ON switch configurations You can order the Z9264F-ON switch in several different configurations. ● Z9264F-ON AC or DC Normal Airflow-sixty-four 1/10/25/40/50/100 GbE ports, two SFP+ 1/10 ports, two AC or DC power supply and four fan subsystems with airflow from the I/O side to the power supply side ● Z9264F-ON AC or DC Reverse Airflow-sixty-four 1/10/25/40/50/100 GbE ports, two SFP+ 1/10 ports, two AC or DC power supply and four fan subsystems with airflow from the power supply side to the I/O side ● Fan with airflow from the I/O side to the PSU side-normal airflow ● Fan with airflow from the PSU side to the I/O side-reverse airflow ● AC or DC power supply with airflow from the I/O side to the PSU side-normal airflow ● AC or DC power supply with airflow from the PSU side to the I/O side-reverse airflow Luggage tag The switch has a pull-out tag, known as a luggage tag, on the I/O-side of the switch. The front of the luggage tag includes switch ID information. The back of the luggage tag includes a QRL that takes you to a How-To site where you can watch videos about racking the switch, replacing components, configuring port channels, and so on. 10 Z9264F-ON switch