Dell Z9264F-ON EMC PowerSwitch Installation Guide March 2022 - Page 37

Table 6. Environmental parameters (continued) Parameter Operating humidity Storage temperature Storage humidity Maximum thermal output Maximum operational altitude Maximum non-operational altitude Shock Table 7. AC power requirements Parameter Power supply Maximum current draw per switch Maximum power capability Typical power consumption Table 8. DC power requirements Parameter Minimum/maximum input voltage range Input power at full load Input current at full load Specifications 5% to 90% (RH), non-condensing -40°C to 70°C (-40°F to 158°F) 5% to 90%, non-condensing 470 W = 1603.7 BTU/Hr 10,000 feet (3048 meters) 39,370 feet (12,000 meters) Dell EMC Spec SV0115 Specifications 100-240 VAC 50/60 Hz 4.7A/3.9A at 100/120V AC 2.35A/1.95A at 200/240V AC 1104.37W (based on 4.5W QSFP28) 900W Specifications -48V, -60V ● −48V/930W, −60V/950W (without fan) ● −48V/940W −60V/ 960W, with fan ● −48V/19.0A −60V/ 15.6A, without fan ● −48V/19.2A −60V/ 16.0A, with fan IEEE standards The Z9264F-ON switch complies with the following IEEE standards. ● 802.1ab (LLDP) ● 802.1ax (Layer 2) ● 802.1d, 802.1w, 802.1s, 802.1x (Mgmt/Security), 802.3x (Layer 2) ● 802.3 (1000BASE-KX) ● 802.3ba (40GbE and 100GbE ports) Agency compliance The Z9264F-ON switch is designed to comply with the following safety and agency requirements: USA Federal Communications Commission FCC statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designated to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and Specifications 37