Dell Z9264F-ON EMC PowerSwitch Installation Guide March 2022 - Page 8
LED behavior, Table 1. Z9264F-ON switch LED behavior
View all Dell Z9264F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
LED behavior The following Z9264F-ON switch LED behavior is seen during open networking installation environment (ONIE) operations: Figure 4. Z9264F-ON LEDs 1. Locator LED 3. Power LED 5. System LED 7. Stack ID LED Table 1. Z9264F-ON switch LED behavior LED System Status/Health LED Power LED Primary LED FAN LED PSU LED 8 Z9264F-ON switch 2. Fan LED 4. Primary LED 6. Port activity LED 8. Top: RJ-45 Ethernet Console Port LED. Bottom: RJ-45 Ethernet Management Port LED: Left is link; right is activity Description ● Solid green-Normal operation ● Flashing green-Booting ● Solid yellow (amber)-Critical system error ● Flashing yellow-Noncritical system error, fan failure, or power supply failure ● Off-No power ● Solid Green-Normal operation ● Solid yellow-POST is in process ● Flashing yellow-Power supply failed ● Off-Switch is in Stacking Secondary mode ● Solid green-Switch is in Stacking Primary or Standalone mode ● Off-No power ● Solid green-Normal operation; fan powered and running at the expected RPM ● Solid yellow-Fan failed-including incompatible airflow direction when you insert the PSU or fan trays with differing airflows ● Off-No power ● Solid green-Normal operation ● Solid yellow-Power supply critical event causing a shutdown