Denon AVR-2311 Owners Manual - English - Page 29

ENGLISH Tuning in radio stations nnPresetting radio stations (Manual preset) Your favorite broadcast stations can be preset so that you can tune them in easily. Multicasts can also be preset. Up to 56 stations can be preset. • Stations can be preset automatically at "Auto Preset" (vpage 47). If "Auto Preset" is performed after performing "Manual Preset", the "Manual Preset" settings will be overwritten. 1 Tune in the broadcast station you want to preset. 2 Press MEMORY. Specify a name for the preset broadcast station (Preset Name) (vpage 48) nnListening to preset stations 1 Press SHIFT to select the memory block (A to G). 2 Press CH +, CH - or 1 - 8 to select the desired preset channel. 3 Press SHIFT to select the block (A to G) in which to preset the channel (1 to 8 per block), then press CH +, CH - or 1 - 8 to select the preset number. 4 Press MEMORY again to complete the setting. • To preset other stations, repeat steps 1 to 4. Default settings Block (A - G) and Channel (1 - 8) A1 - A8 B1 - B8 C1 - C8 D1 - D8 E1 - E8 F1 - F8 G1 - G8 Default Settings 87.5 / 87.9 / 89.1 / 93.3 / 97.9 / 98.1 / 98.9 / 100.1 MHz 101.9 / 102.7 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1 / 90.1 MHz 530 / 600 / 930 / 1000 / 1120 / 1210 / 1400 / 1710 kHz 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz You can also operate via the main unit. In this case, perform the following operations. Press TUNING PRESET, then turn SOURCE SELECT to select the preset radio station. nnDirect frequency tuning You can enter the receiving frequency directly to tune in. 1 Press SEARCH. 2 Input frequencies using the 0 - 9. • If o is pressed, the immediately preceding input is cancelled. 3 When setting is completed, press ENTER. The preset frequency is tuned in. nnCheck the HD Radio reception information Press STATUS while an HD Radio broadcast is being received. The current reception information is shown on the display. q Normal w Frequency / Signal strength e Station name / Program and Program type r Title name / Artist name t Album name / Genre name NOTE If the station signal weakens while receiving a digital broadcast (while and text is displayed), the mode automatically switches to the analog reception mode (the reception frequency is displayed). Because of this, the indicator and text may flicker if the station signal level is weak and unstable. nnTuner (HD Radio reception) operation Operation buttons CH +, - MENU uio p ENTER SEARCH RETURN BAND MODE TUNING df 0 - 9 SHIFT MEMORY TV POWER TV INPUT Function Preset channel selection Amp menu Cursor operation / Multicast switching (ui) Enter Direct frequency tuning Return FM/AM switching Switch search modes Tuning (up/down) Preset channel selection (1 - 8) / Direct frequency tuning (0 - 9) Preset channel block selection Preset memory registration TV power on/standby (Default : SONY) Switch TV input (Default : SONY) 26