Denon AVR-2311 Owners Manual - English - Page 64
ZONE2 Setup
View all Denon AVR-2311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Simple version Basic version Setting items 2ch Direct/Stereo (Continued) Setting details Crossover : Set the maximum frequency of the bass signal output from each channel to the subwoofer. • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz • This setting can be set made "2ch Direct/Stereo" - "Subwoofer" is set to "Yes". • If the "2ch Direct/Stereo" - "Front" setting is "Large" and the "SW Mode" setting is "LFE", "Full Band" is displayed and the setting cannot be made. Dist. FL / Dist. FR : Select the speaker. • 0.0ft - 60.0ft (12.0ft) / 0.00m - 18.00m (3.60m) : Set the distance to the speaker. Auto Surround Mode Make setting for memorizing surround mode setting for each input signal type. Set so that the difference between the front left speaker and front right speaker distances is 20.0 ft (6.0 m) or less. Level FL / Level FR : Select the speaker. • -12.0dB - +12.0dB (0.0dB) : Adjust the level of each channel. ON : Memorize settings. Automatically play with the last used surround mode. OFF : Do not memorize settings. Surround mode does not change according to input signal. • The auto surround mode function lets you store in the memory the surround mode last used for playing the four types of input signals listed below. q Analog and PCM 2-channel signals w Dolby Digital and DTS 2-channel signals e Dolby Digital and DTS multi-channel signals r LPCM Multi-channel signals • When playing in PURE DIRECT, the surround mode does not change even if the input signal is changed. ENGLISH Manual Setup Setting items Setting details EQ Customize Audyssey Byp. L/R : Set when not using "Audyssey Byp. L/R" equalizer. Set so that unused equalizer • Used : Use. settings are not displayed • Not Used : Do not use. when MULTEQ is pressed. Set so that "Audyssey Byp. L/R" settings can be made when Audyssey Auto Setup is performed. Audyssey Flat : Set when not using "Audyssey Flat" equalizer. • Used : Use. • Not Used : Do not use. Set so that "Audyssey Flat" settings can be made when Audyssey Auto Setup is performed. Manual : Set when not using the "Manual" equalizer. • Used : Use. • Not Used : Do not use. The equalizer mode in which "Not Used" is selected cannot be stored and recalled in the Quick Select function. ZONE2 Setup Default settings are underlined. Set the audio to play back with ZONE2. Setting items Setting details Bass Adjust low frequency range (bass). Treble Adjust high frequency range (treble). HPF Make settings for cutting the low range to reduce distortion in the bass. Level Lch Adjust the left channel output level. Level Rch Adjust the right channel output level. -10dB - +10dB (0dB) -10dB - +10dB (0dB) ON : The low range is attenuated. OFF : The low range is not attenuated. -12dB - +12dB (0dB) The "Level Lch" can be set when "Channel" (vpage 62) is set to "Stereo". -12dB - +12dB (0dB) The "Level Rch" can be set when "Channel" (vpage 62) is set to "Stereo". Advanced version Information Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu 61