Denon AVR-2311 Owners Manual - English - Page 45
Playback, Quick select function
View all Denon AVR-2311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
ENGLISH Playback 1 Switch ZONE SELECT to "ZONE2". The remote control unit switches to the operating mode for ZONE2. 2 Press AMP. 3 Press ZONE/DEVICE ON to turn on the ZONE2 power. The indicator on the display lights. • Also, pressing any of input source select button in standby mode turns on the power. • When ZONE/DEVICE OFF is pressed, ZONE2 turns off. • Power in ZONE2 can be turned on or off by pressing ZONE2 ON/OFF on the main unit. Input source select buttons 4 Press the input source select button. The audio signal of the selected source is output to ZONE2. • Turn SOURCE SELECT after pressing ZONE2 / REC SELECT on the main unit to select an input source. Adjusting the volume Use VOL df to adjust the volume. GAdjustable rangeH - - - -80dB - -40dB - 18dB (When the "Volume Display" (vpage 62) setting is "Relative") GAdjustable rangeH 0 - 41 - 99 (When the "Volume Display" (vpage 62) setting is "Absolute") • At time of purchase, "Volume Limit" (vpage 62) is set to "-10dB (71)". Quick select function It is also possible to save three settings for ZONE2. nnSaving the settings 1 Set the items below to the settings you want to save. q Input source (vpage 42) w Volume (vpage 42) Turn MASTER VOLUME after pressing ZONE2/REC SELECT on the main unit to adjust the sound volume. Turning off the sound temporarily Press MUTE. The sound is reduced to the level set at "Mute Level" (vpage 62) in the menu. • To cancel, either adjust the volume or press MUTE again. • The setting is canceled when the zone's power is turned off. 2 Switch ZONE SELECT to "ZONE2". The remote control unit switches to the operating mode for ZONE2. 3 Press and hold the desired QUICK SELECT button until "Memory" appears on the display. The current settings will be memorized. QUICK SELECT 1 QUICK SELECT 2 QUICK SELECT 3 GQuick select defaultsH Input source BD SAT/CBL DOCK Volume -40dB -40dB -40dB nnRecalling the settings 1 Switch ZONE SELECT to "ZONE2". The remote control unit switches to the operating mode for ZONE2. When power for both MAIN ZONE and ZONE2 is set to ON, power of the MAIN ZONE only can be turned off. Select "MAIN" in step 1 then press ZONE/DEVICE OFF. 2 Press QUICK SELECT at which the settings you want to call out are saved. Naming quick select settings See "Quick Select Name" (vpage 63). 42