Denon AVR-2311 Owners Manual - English - Page 43

ENGLISH Convenient functions Quick select function All of the settings in step 1 can be memorized together. By memorizing frequently used settings, you can quickly access and enjoy a playback environment that is consistently the same. nnSaving the settings 1 Set the items below to the settings you want to save. q Input source (vpage 21) w Volume (vpage 21) e Surround mode (vpage 28) r Video Select (vpage 49) t Audyssey Setting (MultEQ®, Dynamic EQ®, Dynamic Volume®) (vpage 54) 2 Press and hold the desired QUICK SELECT until "Memory" appears on the display. The current settings will be memorized. QUICK SELECT 1 QUICK SELECT 2 QUICK SELECT 3 GQuick Select DefaultsH Input source BD SAT/CBL DOCK nnRecalling the settings Press QUICK SELECT at which the settings you want to call out are saved. The , or indicator illuminates on the display. Volume -40 dB -40 dB -40 dB Naming quick select settings See "Quick Select Name" (vpage 63). • The Quick Select function can be set separately for the different zones (vpage 42 "Quick select function"). • If QUICK SELECT on the main unit is pressed, the same function as with the remote control unit can be obtained. NOTE Input sources stored with the quick select function cannot be selected if they have been deleted at "Source Delete" (vpage 62). In this case, store them again. REC OUT mode When using the audio/video recording connectors (DVR outputs), you can record the audio or video from a different program source while listening to the currently played track. 1 Press ZONE2/REC SELECT. "ZONE2 Source" is shown on the display. 2 Turn SOURCE SELECT until "RECOUT Source" is displayed. The indicator illuminates. ZONE2 Source ZONE2 CD ···· ZONE2 HD Radio RECOUT HD Radio RECOUT USB/iPod ···· RECOUT Source 3 Turn SOURCE SELECT to choose the input source to be recorded. • For operating instructions, refer to the respective equipment's operating instructions. • To record FM or AM broadcasts, select the broadcast (vpage 25). 4 Start recording. • For operating instructions, refer to the respective equipment's operating instructions. • To cancel, press ZONE2/REC SELECT, then turn SOURCE SELECT until "ZONE2 Source" is displayed. • Make a test recording before starting the actual recording. • The digital signals are not output to the analog REC OUT connectors. • As the digital audio signal input from the HDMI connector is not output to the digital recording connector (OPTICAL), you should connect using the OPTICAL and COAXIAL connectors. • Sources selected with the REC OUT mode are output from ZONE2 as well. • The operable buttons on the remote control unit in REC OUT mode while it is in the operating mode for ZONE2 are as follows: • ZONE/DEVICE power button • Muting button • Master volume control button NOTE • Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder. • Input sources for which "Delete" is selected at "Source Delete" (vpage 62) cannot be selected. 40