Denon AVR-2311 Owners Manual - English - Page 44
Playback in ZONE2 Separate room
View all Denon AVR-2311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Simple version Basic version ENGLISH Convenient functions Various memory functions nnPersonal memory plus function This function sets the settings (input mode, surround mode, HDMI output mode, MultEQ, Dynamic EQ, Dynamic Volume, audio delay etc.) last selected for the individual input sources. The surround parameters, tone settings and the volumes of the different speakers are stored for the individual surround modes. nnLast function memory This function stores the settings which were made before going into the standby mode. When the power is turned back on, the settings are restored. Playback in ZONE2 (Separate room) • You can operate this unit so as to enjoy audio in a room (ZONE2) other than the MAIN ZONE (room where the unit is located). • You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE and ZONE2. • There are two methods to do this, as described below. Choose one of the methods. q ZONE2 playback by speaker output w ZONE2 playback by audio output (PRE OUT) (using an external amplifier) q ZONE2 playback by speaker output The ZONE2 audio signals are output from this unit's SURR.BACK/AMP ASSIGN speaker terminals using the amplifier assignment function. w ZONE2 playback by audio output The audio signals connected to this unit's ZONE2 output terminals (ZONE2 OUT) are output to the ZONE2's amplifier and played with that amplifier. Connection (ZONE2) MAIN ZONE L R This unit Connecting and setting the speakers "Amp Assign" setting (vpage 57) and audio signals output Connecting the speakers MAIN ZONE ZONE2 RL AUX IN ZONE2 Output signal : Stereo (L / R) This unit ZONE2 • We recommend using high quality pin-plug cables for audio connections in order to prevent noise. • Also be sure to read the operating instructions of the connected devices. NOTE It is not possible to play the digital audio signals input from the HDMI, COAXIAL or OPTICAL terminals in ZONE2. Play using analog connections (in stereo). Advanced version Information 41