Denon AVR-2803S Operating Instructions - Page 18
ConfiEuration
View all Denon AVR-2803S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
• Set up in function of your speaker systems. Performing this setup optimizes the system. • The composition of the signals output to the different channels and the frequency response are adjusted automatically combination of speakers actually being used. according to the 1 At the System Setup Menu select "Speaker Configuration". System Setup Menu 7Speaker Configuration Delay Time Channel Level Digital In Assignment Video In Assignment Dolby DlKital Setup Zone2 Control _,_ Switchtothespeakerconfigurationscreen. Set whether or not speakers are connected and, if so, their size parameters. • To select the speaker Speaker ConfiEuration _Front Sp. Center Sp. Subwoofer "Speaker _ Configuration Surround _s_;_ Sp, Ba_ [_ G • To select the parameter Press the ENTER button to finalize the setting. Center Sp Front Sp Subwoofer Surround Sp Surround back Sp NOTE: I Select "Large" or "Small" not according to the actual size of the speaker but according to the speaker's capacity for playing low frequency (bass sound below frequency set for the Crossover Frequency mode and below) signals. If you do not know, try comparing the sound at both sett ngs sett ng the vo ume to a eve ow enough so as not to damage the speakers to determ ne the proper sett rig. • Parameters Large Select this when using speakers that have sufficient performance for reproducing bass sound below the frequency set for the Crossover Frequency mode. Small Select this when using speakers that do not have sufficient performance for reproducing bass sound below the frequency set for the Crossover Frequency mode. When this is set, bass sound with a frequency below the frequency set for the Crossover Frequency mode is sent to the subwoofer. When this setting is selected, low frequencies of below the frequency set for the Crossover Frequency mode are assigned to the subwoofer. None Select this when no speakers are installed. Yes/No Select "Yes" when a subwoofer is installed, "No" when a subwoofer is not installed. 2spkrs/lspkr.......Set the number of speakers to be used for the surround back channel. If the subwoofer has sufficient low frequency playback capacity, good sound can be achieved even when "Small" is set for the front, center and surround speakers. For the majority of speaker system configurations, using the Small setting for all five main speakers and Subwooofer On with a connected subwoofer will yield the best results. 18