Denon AVR-2803S Operating Instructions - Page 48

MULTI ZONE MUSIC ENTERTAINMENT SYSTEM • When the outputs of the "ZONE 2" OUT terminals are wired and connected to integrated ampfifiers installed in other rooms, different sources can be played in rooms other than the main zone in which this unit and the playback devices are installed. (Refer to ZONE 2 on the diagram below.) • ZONE 2 SPEAKER OUT can be used when "ZONE2" is selected at System Setup Menu "Power Amp Assignment". In this case, Surround Back Speaker Out cannot be used for MAIN ZONE. (See page 25.) • When a sold separately room to-room remote control unit (DENON RC-616, 6t7 or 618) is wired and connected between the MAIN ZONE and ZONE 2, the remote-controllable devices in the main zone can be controlled from ZONE 2 using the remote control unit. To control playback devices other than the ones above, either use that device's remote control unit or preset a separately sold programmable remote control unit. NOTES: • For the AUDIO output, use high quality pin-plug cords and wire in such a way that there is no humming or noise. • For instructions on installation and operation of separately sold devices, refer to the devices' operating instructions. • MULTI ZONE MUSIC ENTERTAINMENT ZONE 2 SYSTEM (When using PREOUT} MAIN ZONE _NTEGRATED AMPLIFIER PROGRAMMABLE REMOTE CONTROL UNiT ,_ ttN' I_ AVR-2803 ._," Re-6_6 /N a SCYOSNTTERMOL REUMNOITTERC 924 ROOM_OROOMREMOTE (sepatatelysold)controlline CONTROL SYSTEM ZONE2 AUD_Qsignal came -- SPEAKER cable Refer to CONNECTIONS on pages 6 to 13 • MULTI ZONE MUSIC ENTERTAINMENT ZONE 2 SYSTEM (When using SPEAKER OUT) MAIN ZONE PRREOMGORTEAMMABLE CONTROL UNIT ,N' I_ RG_16 m AVR-2803 _f SYSTEM REMOTE CONTROL UNIT RC 924 ...... ROOM_O ROOM REMOTE CONTROL SYSTEM (separately sold) control line ZONE2 SPEAKER cable -- SPEAKER cable Refer to CONNECTIONS on pages 6 to 13 48