Denon CDR W1500 Owners Manual - Page 10

ENGLISH Names and Functions of Remote Control Unit Buttons 2 Buttons not explained here function in the same way as the corresponding buttons on the main unit. 2 Buttons marked "✽" function regardless of the function selector switch. ✽ Normal speed dubbing mode button (DUBBING NORMAL) Number buttons (1 to 10) Use these buttons for direct search and programmed playback. Record button (4 REC) ✽ High speed dubbing mode button (DUBBING HIGH) ✽ Relay mode button (RELAY MODE) Function selector switch Switches the operation of the buttons between the CD and CD-R. Automatic search reverse and forward buttons (8 and 9) CD CD-R Clear button (CLEAR) +10 button Use this button to enter track numbers of 11 or over for direct search and programmed playback. Manual search reverse and forward buttons (6 and 7) ✽ Menu button (MENU) Play button (1 PLAY) Stop button (2 STOP) Program/direct button (PROG/DIRECT) Press this button to switch between the program setting mode and the direct search mode. Normally this is set to the direct search mode. Call button (CALL) Use this button to check the programmed tracks. Random button (RANDOM) Press this button to play the track in random order. (See Page 22.) ✽ Display select button (DISPLAY SEL.) _DUBBING _ NORMAL HIGH RELAY MODE A ! " 1 D # % 2 J ʢ



ʣ 4 S . ʗ 7 M ˎʴ 5 V : ; 8 [ = ] 10 { ? } +10 G & ' 3 P , ʵ 6 Y ʻ

ʼ 9 CLEAR REC 6 7 MENU 8 ENTER 9 STOP PLAY PAUSE 2 3 PROG/DIRECT CALL 1 / ALL A - B RANDOM TIME TITLE CHARACTER DISPLAY SEL. FADER INPUT FINALIZE B REMOTE CONTROL UNIT RC-278 ✽ Enter button (ENTER) Pause button (3 PAUSE) Repeat A - B button (A - B) Press this to perform A-B repeat playback. Repeat 1/ALL button (1/ALL) Press this to perform 1-track repeat playback and all-track repeat playback. Character button (CHARACTER) Finalize button (FINALIZE) Title button (TITLE) Press this button to switch the time display to the title display. Input select button (INPUT) 10 Fader button (FADER) Press this for fade-in and fade-out recording. Time button (TIME) 2 Inserting Disc q Press the OPEN/CLOSE button (5) to open the disc tray. w Insert a disc in the appropriate recess in the tray, label side up. e Press the OPEN/CLOSE button (5) to close the tray. • "Close" lights up, followed by "TOC Reading" and the display will show the type of disc you inserted. • If you insert a blank or partly-recorded CD-R or unfinalized CD-RW, the CD recorder will calibrate the disc for optimum recording. During this process the display will first show "Now OPC" and then the number of audio tracks. Calibration can take up to 60 seconds. (CD-R/RW) • If a CD-R/RW is finalized it will show "CD" on the display. Disc tray Recess OPEN/CLOSE button (5) NOTES: • If your finger should get caught in the disc tray when it closes, press the OPEN/CLOSE button (5). • Only Audio CDs will be accepted. If a non-audio disc is inserted, the display shows "Use Audio CD". • For recording it is important that the blank disc is completely free from dust particles or scratches. See "Disc cleaning" on Page 6. • When text information is entered but not finalized, the disc holder will not open until all of the text information has been deleted. "Text Erase OK?" will be displayed for 2 seconds. When the enter button is pressed during this interval, the text information will be deleted and the disc holder can be opened. 9 SETUP METHOD 5 The 9 items listed below can be set with the setup menu. The following messages will be displayed for the various setting items. • Close the disc trays and set the stop mode for both the CD and CD-R sections. • The contents of the set menu are stored, but this data might be lost if the unit is disconnected from the power source for 2 to 3 days. q "Sync. Rec Synchro recording mode. w "Sync. Level Synchro recording level. e "A.T. Mark Auto track mark. r "FadeIn Time Fade-in recording time. t "FadeOutTime Fade-out recording time. y "Intro Time Scan recording intro time. u "Custom Index Custom index. i "Skip Play Skip play. o "Timer Play Timer playback.