Denon CDR W1500 Owners Manual - Page 19

ENGLISH 4. Fade-in and fade-out recording 5 It is possible to record by gradually increasing the volume (fade-in) or decreasing it (fade-out). (1) Fade-in recording ✽ Also refer to "Setup Method (5) Fade-in time setting" (Page 12). 1 Perform the procedure at "Manual recording" step 1 to 8 (Page 16). 2 Start playing the selection you want to record on the CD player, cassette deck, etc. Press the fader button on the remote control unit. 3 • "Fade In" is displayed, and "FADE" flashes during the fade in operation. • The recorded sound is gradually increased from a recording level of - ∞ to the set recording level in the set time. (2) Fade-out recording ✽ Also refer to "Setup Method (6) Fade-out time setting" (Page 12). During recording, press the fader button on the remote control unit. 1 • "Fade Out" is displayed, and "FADE" flashes during the fade out operation. • The recorded sound is gradually decreased from the set recording level to a recording level of -- ∞ in the set time. NOTE: • The fade in/out recording function does not work in the synchro or copy recording modes. Record manually if you want to use the fade in/out function. 12 NORMAL PLAYBACK 1. Starting playback First try playing the tracks in order. Select the deck to be operated. (Remote control unit) 1 (Main unit) PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER CDR-W1500 1 8 9 PLAY 1 DUBBING NORMAL HIGH TIME DISPLAY TITLE / SELECT CHARACTER STOP 2 PAUSE 3 RELAY MODE OPEN / CLOSE 5 REMOTE SENSOR POWER ON OFF PHONES PHONES LEVEL MULTI JOG - + MIN MAX PUSH ENTER TIME CLEAR INPUT OPEN /CLOSE 5 MENU FINALIZE 4 REC PLAY 1 8 STOP 2 9 PAUSE 3 23 1 1 Load the disc to be played. 1 23 3 CD CD-R _ DUBBING _ NORMAL HIGH RELAY MODE A ! " 1 D # % 2 J ʢ



ʣ 4 S . ʗ 7 M ˎʴ 5 V : ; 8 [ = ] 10 { ? } +10 G & ' 3 P , ʵ 6 Y ʻ

ʼ 9 CLEAR REC 6 7 MENU 8 ENTER 9 STOP PLAY PAUSE 2 3 PROG/DIRECT CALL 1 / ALL A - B RANDOM TIME TITLE CHARACTER DISPLAY SEL. FADER INPUT FINALIZE 2 • Press the PLAY button (1) to start CD play. 2 • "1"lights up and the track number and track time of the track in play appear on the display. • Press the TIME button once, twice or three times to see: Remaining track time, total remaining time, elapsed track time. NOTE: • "No Disc" will be displayed at such times as when a disc is not loaded, the disc cannot be read properly due to scratches or dirt, or the disc is loaded upside down. 2. Starting playback Press the stop button (2 STOP). 3 • Playback stops. • The stop mode is set automatically once all the tracks on the disc have been played. 19