Denon CDR W1500 Owners Manual - Page 17

ENGLISH (3) Stopping recording (Main unit) (Remote control unit) Select the CD-R side. PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER CDR-W1500 8 9 PLAY 1 DUBBING NORMAL HIGH TIME DISPLAY TITLE / SELECT CHARACTER STOP 2 PAUSE 3 RELAY MODE OPEN / CLOSE 5 REMOTE SENSOR POWER ON OFF PHONES PHONES LEVEL MULTI JOG - + MIN MAX PUSH ENTER TIME CLEAR INPUT OPEN /CLOSE 5 MENU FINALIZE 4 REC PLAY 1 8 STOP 2 9 PAUSE 3 1 1 1 During recording, press the stop button (2 STOP). • The stop mode is set automatically once the end of the recordable time is reached. CD CD-R _ DUBBING _ NORMAL HIGH RELAY MODE A ! " 1 D # % 2 J ʢ



ʣ 4 M ˎʴ 5 S . ʗ 7 V : ; 8 [ = ] 10 { ? } +10 G & ' 3 P , ʵ 6 Y ʻ

ʼ 9 CLEAR REC 6 7 MENU 8 ENTER 9 STOP PLAY PAUSE 2 3 PROG/DIRECT CALL 1 / ALL A - B RANDOM TIME TITLE CHARACTER DISPLAY SEL. FADER INPUT FINALIZE NOTES: • When performing digital recording of CD or MD, the track numbers are recorded automatically. (See Page 6.) • When recording digital sources other than CD or MD, track numbers are automatically added when blank sections are detected. (See Page 6.) • During digital recording from CD or MD, the track number may not change if the same track is programmed twice in a row or if the single track repeat mode is set. • It is not possible to make digital recordings of Discs which have already been recorded digitally. The CDR-W1500 includes a serial copy management system. This system limits reproduction of digital signals on digital audio devices to "one generation". Use analog recording to record Discs originally recorded digitally. • The CDR-W1500 is for use in private homes and may not operate properly if used (to record, etc.) in combination with professional equipment or other devices not designed for use in private homes. • To eject the Disc if the "Copy Prohibit" or "Dig.Unlock" message is displayed during digital recording and the recording pause mode is set, first press the stop button (2 STOP), then press the open/close button (5 OPEN/CLOSE) to eject the Disc. (4) Adding track numbers during recording (Main unit) (Remote control unit) Select the CD-R side. 1 PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER CDR-W1500 8 9 PLAY 1 DUBBING NORMAL HIGH TIME DISPLAY TITLE / SELECT CHARACTER STOP 2 PAUSE 3 RELAY MODE OPEN / CLOSE 5 REMOTE SENSOR POWER ON OFF PHONES PHONES LEVEL MULTI JOG - + MIN MAX PUSH ENTER TIME CLEAR INPUT OPEN /CLOSE 5 MENU FINALIZE 4 REC PLAY 1 8 STOP 2 9 PAUSE 3 22 1 2 • Track numbers can be added during recording regardless of the recording mode. CD CD-R _ DUBBING _ NORMAL HIGH RELAY MODE A ! " 1 J ʢ



ʣ 4 S . ʗ 7 [ = ] 10 D # % 2 M ˎʴ 5 V : ; 8 { ? } +10 G & ' 3 P , ʵ 6 Y ʻ

ʼ 9 CLEAR REC 6 7 MENU 8 ENTER 9 STOP PLAY PAUSE 2 3 PROG/DIRECT CALL 1 / ALL A - B RANDOM TIME TITLE CHARACTER DISPLAY SEL. FADER INPUT FINALIZE 2 Press the record button (4 REC). During recording, press the record button (4 REC). • When the record button (4 REC) is pressed during recording, a 1 track number is added at that point. • A new track number cannot be added for approximately 4 seconds after the last track number. 1st track 2nd track (Recording continues.) (5) Stopping recording temporarily • Recording can be stopped temporarily then resumed from the same point. q Press the pause button (3 PAUSE). During recording, press the pause button (3 PAUSE). • When the pause button (3 PAUSE) is pressed during 2 recording, the pause mode is set at that point and the track number changes. • Press the play button (1 PLAY) to resume recording. 1st track 2nd track w Press the play button (1 PLAY). • A blank section of approximately 2 seconds is inserted before recording resumes. 17