Denon DN-HC4500 Operating Instructions - Page 10
Basic Operation - cue button part
UPC - 081757508070
View all Denon DN-HC4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
ENGLISH 5 BASIC OPERATION This section describes the basic operations when connected to a DN-D4000/D4500/BU4500. PLAY and PAUSE • Each push of the PLAY/PAUSE button switches between playback and pause. PLAY/PAUSE button illuminates solid green during playback and flashes in pause. • When the PLAY/PAUSE button is pushed during play, the DN-D4500 pauses playback at that point. Push PLAY/PAUSE button once again and playback resumes. PLAY and Cue • When the CUE button is pushed during playback, the track/file stops and returns to the original position of which playback started from, the (Cue point). This function is also called Back-Cue. With the Back-Cue function, you can start from exactly same position. The CUE button illuminates solid red when DND4000/D4500/BU4500 is ready to start playback. • You can set and change Cue point as follows. • When you started playback. • File select finished. • Manual search. Adjusting the pitch With Pitch slider you can adjust the playback speed (Pitch). Push the PITCH button to light the PITCH LED. 1 Pitch decreases Move the Pitch Slider to adjust 2 the pitch. The current pitch setting is displayed on the display. Pitch increases The DN-D4000/D4500/BU4500 has several pitch ranges. When the RANGE button is pushed for more than 1 sec, the pitch range can be selected with the 3 PARAMETERS knob. • When the PARAMETERS knob is pushed the pitch range is entered and the pitch range selection mode is cancelled. Select the File • Turn the PARAMETERS knob. Pitch Bend With PITCH BEND function you can change pitch temporary. DN-D4000/D4500/BU4500 has two ways for this function PITCH BEND buttons and JOG disc. [PITCH BEND +/- buttons] • Push the PITCH BEND button for momentary change of pitch. 1 While holding these buttons down, the pitch continues to change up to the limitation. • After releasing the PITCH BEND buttons, playback pitch returns to slider setting. [JOG disc] • The playback speed can 2 be changed by turning JOG disc during playback. Power on play When the DN-D4000/D4500/BU4500's 1 "Power On Play" presetting is set to "ON", playback starts from the beginning of the disc when the power is turned on. Relay playback For instructions on relay playback, refer to the manual of the DN-D4000/D4500/BU4500. 6 ENGLISH