Denon DN-HC4500 Operating Instructions - Page 6

ENGLISH 2 CONNECTIONS CONNECTIONS 1. Turn off the POWER switch. 2. Connect the RCA pin cords to the inputs on your mixer. COUTION: • Be sure to use the supplied control cord. Using another type of cable may result in damage. • Be sure the power is off when connecting the control cord. Otherwise the units may not work properly. RCA Cord CH4 Input jack CH6 Input jack RCA Cord 3.5 mm stereo mini cord Deck1 Fader jack CH2 Input jack DN-X900 RCA Cord CH2 Fader jack 3.5 mm stereo mini cord DN-D4000/ DN-D4500/ BU4500 Drive1 Fader jack Drive1 Output jack DN-HC4500 Deck1 Output jack CH4 Fader jack CH6 Fader jack 3.5 mm stereo mini cord X-control CH8 Input jack CH8 Fader jack 3.5 mm stereo mini cord RCA Cord Drive2 Fader jack Drive2 Output jack DRIVE terminal Deck2 Fader jack USB B terminal Deck2 Output jack Some features will not work for DN-D4000. DENON PC/MAC Upgrade Application and ASIO Driver Application included. Computer OS versions that can be connected to the DN-HC4500: Windows XP SP2 Mac OSX 10.4 or later Computers with other operating systems are not compatible with USB MIDI, so the computer may operate erratically after connected to the DNHC4500 by USB. Connection to a PC • The DN-HC4500 is a plug-and-play device. This means that when the DN-HC4500 is first connected to your computer, the driver is installed automatically. • To connect the DN-HC4500 and a PC via a usable USB port, use the included USB cable. • When connected, the display below appears at the bottom right of the PC's screen. Found New Hardware USB audio device Once installation is completed, the message "Your new hardware is installed and ready to use." is displayed, as shown below. Found New Hardware Your new hardware is installed and ready to use. Installation is now complete. The DN-HC4500 is now usable. Connection to a Macintosh computer • The DN-HC4500 is plug-and-play device based on the Macintosh OS, and is immediately ready for use when connected. • To connect the DN-HC4500 and Macintosh computer via a usable USB port, use the included USB cable. 2 ENGLISH