Denon DN-HC4500 Operating Instructions - Page 16

ENGLISH Updating procedure 1 Connect the computer by USB cable. Turn on the device's power in the update mode. Turning on the power in the update mode: Press the BACK and SOURCE buttons simultaneously on Deck1 or Deck2. The following appears on the device's panel display: If the device is not connected or not in the update mode at this time, the screen shown below is displayed. If the update file has not been loaded, "File is not ready." is displayed. on Deck1 2 The version information is displayed. 3 -2 on Deck2 If the device is not yet connected, the following appears on the device's panel display: Update file not loaded Drag and drop the update file to the "DENON DJ Upgrade program" screen. The Load button can now be selected. The following is displayed on the device's panel: During file transfer: 5 on Deck1 4 -2 Once file transfer is finished; The Load button can be selected. Press the Load button to transfer the update file. (Left side: Old version; Right side: New version) Once file transfer is finished, press the OK button. The Execute button is now enabled (can be pressed). on Deck2 Launch the DN-HC4500 update program. The screen shown below appears on the computer. 5 -1 3 -1 Current version information The identified device name is displayed. 12 ENGLISH